Rax Industry is a pole line hardware full line supplier, with options ranging from Messenger Wire, Stainless Lashing Wire, Stainless Strap, Preformed Guy Grip, Pole Clamp, Strand Ground Clamp.
We provide a one stop solution from pre-sales analysis consulting, design, modification, production, quality control, packing, logistic services, not just manufacturing.
For over 10 years Rax Industry pole line hardware system has developed to be a top-level brand in China, the strongest and most stable. Materials used for pole line hardware are high quality galvanized steel and strength promised, Factory ISO9001 and ISO14001 certified.
Rax Industry is your premier pole line hardware supplier.
Experience work with TNB
Double Arming Bolt
Guy Clamp
Guy grip
Pole Clamp
Square Head Bolt
Square Washer
Strand Ground Clamp
Triangular bracet
Guy Grip
GUY-GRIP, installed at the top, the breaker and the anchor, provide today’s most effective method for securing guy strand. This unique, one-piece dead-end is neat in appearance and free from bolts or high-stress holding devices. It is a cabled loop, a feature that provides more durability, easier tensioning and adaptability to multiple guying.
GUY-GRIPS are made of the same material as the strand to which they are applied. They should be used on hardware that is held in a fixed position. The fitting should not be allowed to rotate or spin about the axis of the strand. They should not be used as tools including come-alongs, pulling-in grips, etc.
Cross-over Marks:
- —Indicates starting point for application on smaller diameter fittings.
- —Indicates alternate starting point for application on larger diameter fittings.
Open Loop: Furnished as standard, all sizes.
Pitch Length: One complete wrap.
Short Leg-Long Leg: Identifies rods belonging to each leg, after application.
Color Code and Length: Assists in identification of strand size, corresponding to tabular information below. Identification Tape: Shows catalog number, nominal sizes.
| Description Material Strand Size | 3/8″ | 5 /16 “ | 1/8″ |
| Materials | Galvanized stee wire | Galvanized stee wire | Galvanized stee wire |
| Standard specs of material used | BS:183 | BS:183 | BS:183 |
| Diameter of each wire | 3.00 mm | 2.2 mm | 1.6 mm |
| No. of wires | 5 Nos | 5 Nos | 3 Nos |
| Slip Strength | 60 kN | 42kN | |
| Length of each set | 800 mm | 600 mm | 400 mm |
| Color Code | Blue | Orange | Yelty |
| Lay Direction | Right | Right | Left |
| Difference between the shortest and the longest length | 25 mm (max) | 25 mm (max) | 25 mm (max) |
| General Tolerance | ±5% | ±5% | ±5% |
Lashing Wire
Stainless Steel Lashing Wire is used in a lasher to lash a cable or combination of cables to a supporting strand. It is a specially controlled annealing process, which yields a uniform, fine grain structure throughout the wire length and cross section for best results. All lashing wire is manufactured in the USA in accordance with standard specifications for lashing wire and may be certified upon request. It is available in 430, 302, and 316 stainless steel alloy.
Lashing Wire Grade Types
Type 430 (S43000)
This is a magnetic thermally nonhardening ferritic stainless steel alloy containing 16-18%
chromium with no nickel or molybdenum rendering it susceptible to corrosion attack.
Type 302 (S30200)
This is an austenitic nonmagnetic and thermally nonhardening stainless steel. Corrosion and oxidation resistance is provided by the 18-20% chromium and the 8% min. nickel content.
Type 316 (S31600)
This is also austenitic, nonmagnetic and thermally nonhardening stainless steel. In comparison to type 302, the nickel content is increased from 8% to 10% and includes the addition of up to 3% molybdenum.
Product Specifications:
| Part No. | Type | Size | Temper | Tensile Strength | Average Break |
| .038SS302ACW | 302 | .038 | Annealed | 95,000-125,000 PSI | 115 lbs. |
| .045SS302ACW | 302 | .045 | Annealed | 95,000-125,000 PSI | 165 lbs. |
| .045SS430ACW | 430 | .045 | Annealed | 70,000-95,000 PSI | 125 lbs. |
| .045SS316ACW | 316 | .045 | Annealed | 95,000-120,000 PSI | 145 lbs. |
Packaging:
| Part No. | Ft/Coil | W.T. Coil | Wt/box of 6 |
| .038SS302ACW | 1,600 | 6.3 | 37 lbs. |
| .045SS302ACW | 1,200 | 6.5 | 40 lbs. |
| .045SS430ACW | 1,200 | 6.5 | 40 lbs. |
| .045SS316ACW | 1,200 | 6.5 | 40 lbs. |
Straight hub or tapered hub are available.
All weights and footage lengths are approximate. There are six (6) coils per box with total box weight described above. Footages length are plus/minus 30 ft. Pallet quantity is 378 coils or 63 boxes.
Guy Wire
Guy wire is also called stay wire or messenger wire which is used on pole line or overhead line construction.
Pole Clamp
ROUND CONCRETE POLE CLAMP TYPE: 2A
Hot Dip Galvanized
Materials:
Clamp: Mild Steel Plate or Flat Bar as per ASTM A283 Grade A.
Bolts and Nuts: as per ASTM A307
Finished:
Hot Dip Galvanized: ASTM A153
BS EN ISO 1461, BS EN ISO 14713-1, BS EN ISO 14713-2
Clamp: 610gm/m2of surface or85 µm thick(1um = 7.17 g/m2)(1000 g/m² =140 µm)
Bolts and Nuts: 381gm/m2 of surface or 2.11 mils thick
Thickness: 3mm, 4mm, 5mm and 6mm
Width: 38mm (1-1/2″) and 50mm (2″)
Standard Parts:
2 pcs. Machine Bolt 16mm dia(5/8″) x 100mm (4″) Length
2 pcs. N.C. Square Nut 16mm dia(5/8″)
Pole Clamp Sizes 7″ – 9″ – 204 Type
ROUND CONCRETE POLE CLAMP TYPE: CA
Hot Dip Galvanized
Materials:
Clamp: Mild Steel Plate or Flat Bar as per ASTM A283 Grade A.
Bolts and Nuts: as per ASTM A307
Finished:
Hot Dip Galvanized: ASTM A153
Clamp: 610gm/m2 of surface or 85 µmthick
Bolts and Nuts: 381gm/m2 of surface or 2.11 mils thick
Thickness: 3mm, 4mm, 5mm and 6mm
Width: 38mm (1-1/2″) and 50mm (2″)
Standard Parts:
3 pcs. Machine Bolt 16mm dia (5/8″) x 100mm (4″) Length
3 pcs. N.C. Square Nut 16mm dia (5/8″)
Pole Clamp Sizes 7″ – 9″ – 204 Type
ROUND CONCRETE POLE CLAMP TYPE: RL (DOUBLE)
Hot Dip Galvanized
Materials:
Clamp: Mild Steel Plate or Flat Bar as per ASTM A283 Grade A.
Bolts and Nuts: as per ASTM A307
Finished:
Hot Dip Galvanized: ASTM A153
Clamp: 610gm/m2 of surface or 85 µmmils thick
Bolts and Nuts: 381gm/m2 of surface or 2.11 mils thick
Thickness: 3mm, 4mm, 5mm and 6mm
Width: 38mm (1-1/2″) and 50mm (2″)
Standard Parts:
4 pcs. Machine Bolt 16mmdia (5/8″) x 100mm (4″) Length
4 pcs. N.C. Square Nut 16mmdia (5/8″)
Pole Clamp Sizes 7″ – 9″ – 204 Type
Â
ROUND CONCRETE POLE CLAMP TYPE: GCA
Hot Dip Galvanized
Materials:
Clamp: Mild Steel Plate or Flat Bar as per ASTM A283 Grade A.
Bolts and Nuts: as per ASTM A307
Finished:
Hot Dip Galvanized: ASTM A153
Clamp: 610gm/m2 of surface or 85 µm thick
Bolts and Nuts: 381gm/m2 of surface or 2.11 mils thick
Thickness: 3mm, 4mm, 5mm and 6mm
Width: 38mm (1-1/2″) and 50mm (2″)
Standard Parts:
3 pcs. Machine Bolt 16mm dia. (5/8″) x 100mm (4″) Length
3 pcs. N.C. Square Nut 16mm dia. (5/8″)
1 pc. G.I. Spacer 3/4″dia. x 3/4″ dia.
Pole Clamp Sizes 7″ – 9″ – 204 Type
Â
ROUND CONCRETE POLE CLAMP TYPE: DEG
Hot Dip Galvanized
Materials:
Clamp: Mild Steel Plate or Flat Bar as per ASTM A283 Grade A.
Bolts and Nuts: as per ASTM A307
Finished:
Hot Dip Galvanized: ASTM A153
Clamp: 610gm/m2 of surface or 85 µmthick
Bolts and Nuts: 381gm/m2 of surface or 2.11 mils thick
Thickness: 3mm, 4mm, 5mm and 6mm
Width: 38mm (1-1/2″) and 50mm (2″)
Standard Parts:
4 pcs. Machine Bolt 16mm0 (5/8″) x 100mm (4″) Length
4 pcs. N.C. Square Nut 16mm0 (5/8″)
2 pcs. G.I. Spacer 3/4″0 x 3/4″
Pole Clamp Sizes 7″ – 9″ – 204 Type
Bridle Ring
Strand Ground Clamp
HOT DIP GALVANIZED
STRAND CLAMP is used to bond the cable sheath to the messenger strand. The clamp body is made of 1-3/4 X 3/16″-inch steel with a keeper inside riding on the end of the bolt. The 2″-inch bolt can be removed to place the clamp over the messenger wire.
MATERIALS:
Mild Steel Plate per ASTM A 36 and
CRS Shafting as per ASTM A 307
FINISH:
Hot Dip Galvanized
GROUNDING CLAMP.
HOT DIP GALVANIZED
GROUNDING CLAMP is for use with galvanized ground rods. They are lightweight but very strong.
Three sizes cover a range of 3/8″ to 5/8″ diameter rods furnished with a hexagon head screw.
MATERIALS:
Mild Steel Plate per ASTM A 36 and
CRS Shafting as per ASTM A 307
FINISH:
Hot Dip Galvanized
Cable Suspension Clamp
HOT DIP GALVANIZED
STRAIGHT and ANGLE (CURVED)
STRAIGHT with 2 BOLTS & NUTS
CABLE SUSPENSION CLAMP STRAIGHT is used with through bolts, which serve as a clamping member and are shaped to securely grip messenger wire to the pole. A nut and square washer is used between the clamp and the pole to proper spacing.
ANGLE (CURVED) with 2 BOLTS & NUTS
CABLE SUSPENSION CLAMP, ANGLE has curved ends to prevent damage to the messenger strand when turning small angles. All clamps firmly grip 1/4″ to 7/16″-inch (6mm to 11mm) Diameter strand. They are furnished with two Track Bolts 12mm (2″) dia. and a center mounting hole.
MATERIALS:
CLAMPS – Steel per ASTM A-322-64a
BOLTS & NUTS – Per ASTM A-325-71
FINISH:
HOT DIP GALVANIZED as per ASTM A 153. Min. coating 381 g/m2 of surface or 0.054mm thick for the bolts & nuts.
Cable Lashing Wire Clamp
HOT DIP GALVANIZED FORGED CENTER BOLT, ROLLED THREADS
MATERIALS:
CLAMP – Steel as per ASTM A 36
BOLT & NUT – as per ASTM A 307
PARTS:
FORGED CENTER BOLT 6mm (1/4″) dia. X 50mm (2″)
2 – Hex. Nuts N.C. 6mm (1/4″) dia.
1 – Round Washer 6mm (1/4″) dia.
FINISH:
Hot Dip Galvanized as per ASTM A 153 Minimum coating 381 g/m2 of surface or 0.054mm Thick.
Frequently Asked Questions (FAQs)
What is pole line hardware?
Pole line hardware is a significant part of the pole line construction, it is the hardware combined together to create the electrical facility setup come true, it’s likewise termed pole line accessories or pole hardware fitting.
What is the application of the pole line hardware?
It is widely used in many constructions, such as Transmission Line, Telephone Pole Line, and Utility Pole Mounting Line.
What are the types of pole line fittings?
There are hundreds of types, here are some key ones:
- Anchor Rod
- Ball Clevis
- Guy Clamp
- Pole Top Bracket
- Secondary Clevis
- Socket Clevis
- Stay Rod
- Steel Cross Arm
What is the key consideration when choosing products?
Here are some factors that play a huge role when choosing products.
- Type of Material
- Design of the Accessory
- Safety Rating
- Type of Application
- Resistance to Various Conditions
- Cost of Buying