Suspension Clamp
Suspension clamp is also called clamp suspension or suspension fitting. According to the application, Suspension clamp includes suspension clamp for ABC cable, suspension clamp for ADSS cable, suspension clamp for the overhead line.
Suspension clamp is a general speaking of all kinds of clamp which hang the conductors or cables to the pole or tower. Rax Industry cable suspension clamp has many different types and constructions. Features:
- Suitable for a wide range of ABC cable.
- Quickly and easily installed with no tool required
- For line angles up to 30 degrees to 60 degree
- Protect the ABC cable very well.
Rax Industry suspension clamp for ABC cable is designed to suspend the optical fiber cable on the low voltage communication line.
During the installation, the suspension clamp for the ABC cable is hanged in a straight direction to let the cable to be wrapped or positioned easily. The installation is very easy without tools. suspension clamp for ABC cable includes J hook type suspension clamp, plastic suspension clamp, armor grip suspension.
The J hook type suspension clamp consist of a steel J hook, and a rubber part inset and a long bolt.
The rubber part insert is used to wrap the ADSS cable to protect it from friction。The steel J hook will be assembled on the pole by hanging on the pigtail hook. Other types of J hook type suspension clamp will be fastened on the pole by a stainless steel band.
There is a hole in the middle of the rubber part insert. The big hole is designed for ABC bundle conductors line. The small types of holes diameter should be fit with the cable diameter. The J hook suspension clamp is designed according to different spans between poles.
1.suspension clamp for ABC cable
The plastic suspension clamp is a different construction and material with the J hook type suspension clamp. But it acts the same function with the J hook type suspension clamp. The plastic suspension clamp is usually connected with the casting steel bracket to hang on the pole.
 2.suspension clamp for ADSS cable
Rax Industry suspension clamp for ADSS cable is also called preformed suspension clamp. The preformed suspension clamp which has the same function as the normal suspension clamp is designed to hang the conductor or earth wire in a vertical direction.
Rax Industry preformed suspension clamp is fit for high voltage more than 220kv. The preformed suspension clamp unique features :
- protect the conductors efficiently
- Avoid the power waste by corona
- Easy installation
Preformed suspension clamp is designed to protect the ADSS (All-dielectric self-supporting ) cable against shaking and caused by wind flow. The suspension clamp is widely used on the transmission line, tower or distribution systems.
The distance between the two towers is called the span. For a short span, it usually chooses the preformed suspension clamp with O ring. This type of suspension clamp has features of the lightest weight, easy installation and more efficiency to protect the ADSS cable.
For the middle span and long span, there is another type of preformed suspension clamp which is aluminum clad rubber. The armor grip suspension connects with U clevis to hang the cable. The aluminum clad rubber suspension clamp supports and protects the ADSS cable from bending damage.
According to the span, it uses a single suspension clamp for a short span and a double suspension clamp for a long span.
Click here to see the detailed specification that is regarding the Vietnam market. If you are from other markets, please send us the drawings and parameters, and we can customize new mould for you.
3.Suspension clamp for the overhead line.
The suspension clamp for the overhead line is designed to hang the conductors and pole line hardware on to the spool insulator. The material of the suspension clamp body is casting iron and aluminum two types.
When the suspension clamp used to AAC and ACSR, the conductor will be wrapped by a preformed armor rod. The suspension clamp suitable diameter includes the protector’s diameter. The HCT Suspension clamps were suitable for use on Aluminum Conductor Steel Reinforced (ACSR) of outer diameter between 7.00mm and 18.2mm (25mm² and 150mm²).
Another suspension clamp for cable is called Messenger Cable Clamps or cable suspension clamp. Messenger Cable Clamps include curved suspension clamp, 3 bolt suspension clamp. Rax Industry messenger cable clamps consist by two flat bars, bolts, and nut.
Rax Industry messenger cable clamps have two grooves at each iron body. The smaller groove is used to install the messenger wire. The bigger groove is used to hold the figure-Eight self-Supporting cable. In this way, the messenger cable clamp will replace the role of the cable tie. The messenger cable clamp is made from a steel flat bar. The final surface treatment is hot-dip galvanized.
Suspension Clamp Buying Guide
When working on electrical and telecommunication installations, there are two key components that you cannot avoid.
These are cables and poles.
In most cases, the cables are usually hanged to the poles or even towers.
They are responsible for transmitting electricity or communication signals from one point to another.
So, what makes the cables or conductors hang so easily yet the whole process looks delicate and complex?
It is because of one tool: Suspension clamp.
Do you have plans of buying a clamp suspension?
Read on as we guide you on what you need to know about this product.
What is a Suspension Clamp?
To start us off is the suspension clamp definition.
Also known as a suspension fitting, this is an accessory that is specially designed to hang the cables or even the conductors to the pole or even tower.
The clamp is specially constructed so that it is compatible with a wide range of cables and conductors.
Suspension clamp hangs the ABC cables through different angles hence giving them proper support and protection.
To help you understand better, here is a picture of a typical suspension clamp.
As you can see, there is nothing complex about it.
You only need to buy and use it.
Uses of a Suspension Clamp
We have already mentioned the primary function of suspension clamps.
But, it sounds so general, doesn’t it?
Probably, you are looking for the specific functions of suspension clamps.
Here are some specific functions of suspension clamps:
-Suspension clamps protect the conductor right at the installation load.
-The clamps provide a safe and viable mechanical connection regardless of the condition. They achieve this by providing an adequate longitudinal grip control.
This means that the conductor can be released from the clamp only through defined slip loads hence preventing physical damage.
-Suspension clamps control the movement of the conductor. This provides protection against the vibrations that have been induced by strong winds.
Parts of a Suspension Clamp
Just knowing the physical appearance of a suspension clamp is not enough.
It is important that you go further and familiarize yourself with its components.
Here are the parts and components of a typical suspension clamp:
1.The Body
This is the part of the suspension clamp that is responsible for supporting the conductor.
The body is made of an aluminum alloy mainly due to the strength of the material.
It is hard and resistant to stress corrosion.
2.Keeper
This is the part of the clamp that connects the conductor directly to the body.
3.Straps
These are parts of the suspension clamp that transfer load right from the axis of oscillation to the insulator string.
What type of material is used on the straps?
The straps mainly consist of a thick zinc coating.
4.Washers
The importance of this part comes into play when the clamping surface is not perpendicular.
Washers are made of stainless steel and are resistant to corrosion.
5.Bolts and Nuts
Obviously, you know the function of bolts and nuts in any mechanical device.
They are mainly used to complete connections.
Also, the bolts and nuts are made of stainless steel which is known for its strength
6.Threaded Inserts
Sometimes they are known as the threaded bushing.
But, what role do they play in a suspension clamp?
They are basically fastener elements.
This simply means that they are inserted into an object to add a threaded hole.
Like other major parts of the suspension clamp, they are also made of stainless steel.
Design Requirements of Suspension Clamp
What does the design requirement of a suspension clamp entail?
It ensures that there is proper coordination between the physical and mechanical aspects of the suspension clamp.
Also, design requirements ensure that all parts are in their correct position.
This will facilitate the smooth operation of the suspension fitting.
-Anchor clamp
First, you should be able to move the anchor clamp which is next to the conductor freely.
To achieve this, ensure that the trunnion of the clamp is part and parcel of the body.
-Conductor supporting groove
When buying suspension clamp, ensure that the conductor supporting groove has the right measurements.
Check the measurements as indicated by the suspension clamp manufacturer.
The body and the keeper should not have sharp edges or any form of irregularities.
-The design of the straps
When buying a suspension clamp for overhead, try to check the design of the strap.
Ensure that they are round and their sizes match directly with that of the trunnion.
-Designs for bolts and nuts
Although they may look small, they also have strict design requirements,
When buying a suspension clamp or even aerial cable clamp, check for the positioning of the bolts and nuts.
Ensure that they are well attached to the clamp.
They should be well attached to prevent them from dropping when the clamp is in operation.
When it comes to the design ensure that the bot can protrude outside through the thread.
Mechanical Requirements for Suspension Clamp
When you hear the word ‘mechanical’, what comes into your mind?
To most of us, we think of the machines and how they operate.
Well, in this context, the mechanical requirement is all about the operation of a suspension clamp.
So, what are these requirements?
First, a suspension clamp should be able to withstand the deformation load without showing any signs of getting damaged.
This is a requirement that should be fulfilled even if the conductor turns at 30 degrees.
Also, the clamp should be able to withstand the bolts and nuts regardless of how tight they may be.
Types of Suspension Clamps
Do you know that there are different variants of a suspension clamp?
In other words, there is no universal suspension clamp.
Instead, you can buy suspension clamps that have a set of particular specifications that will fully meet your needs.
In most cases, each variant is designed for a specific cable.
Here are the most common types of suspension clamps:
-Suspension clamp for ABC cable
-Suspension clamp for opgw
-AGS suspension clamp
-Suspension clamp for ADSS cable
-Double suspension clamp
– Preformed suspension clamps
-Cable suspension clamp u-type
So, which type of suspension clamp do you think will meet your specific needs?
Suspension Clamp Manufacturers
Do you want to buy the best suspension clamp?
Start by looking for reliable suspension clamp manufacturers.
They will help you to find and choose the right suspension clamp.
At Rax Industry, we have been manufacturing and selling high-quality suspension clamps.
Call us whenever you need the best suspension clamps.
FAQ
What is a suspension clamp?
suspension clamp is also called clamp suspension or suspension fitting, it is a general speaking of all kinds of clamps that hang the conductors or cables to the pole or tower.
What does a suspension clamp consist of?
Here are the components of a typical suspension clamp:
- The Body
- Keeper
- Straps
- Washers
- Bolts and Nuts
- Threaded Inserts
What are the types of clamp suspensions?
Here are the most common types of suspension clamps:
- Suspension clamp for ABC cable
- Suspension clamp for OPGW
- AGS suspension clamp
- Suspension clamp for ADSS cable
- Double suspension clamp
- Preformed suspension clamps
- Cable suspension clamp u-type
What are the features of a clamp suspension?
- Suitable for a wide range of ABC cable.
- Quickly and easily installed with no tool required
- For line angles up to 30 degrees to 60 degree
- Protect the ABC cable very well.